FRONT CRANK RADIAL SHAFT SEAL INSTALLER

  (A)

  - CLEAN SPECIAL TOOL NO.1 FROM THE SET OF SPECIAL TOOLS ATA-4480 AND COAT WITH FRESH ENGINE OIL.

  - SECURE SPECIAL TOOL NO. USING SPECIAL TOOL NO.2 FROM THE SET OF SPECIAL TOOLS ATA-4480 TO THE CRANKSHAFT.

  (B)

  ATTENTION!

  - TOUCHING THE SEALING LIP (ON THE INSIDE) OF THE CRANKSHAFT SEAL IS NOT PERMITTED.

  - COATING THE OUTSIDE OF THE CRANKSHAFT SEAL WITH OIL IS NOT PERMITTED.

  - CAREFULLY SLIDE THE CRANKSHAFT SEAL (1) STRAIGHT AND IN A ROTATIONAL MOVEMENT ONTO SPECIAL TOOL NO. 1 FROM THE SET OF SPECIAL TOOLS ATA-4480    
    UNTIL IT IS FLUSH WITH THE CRANKCASE.

  (C)

  - POSITION THE SLEEVE NO.3 FROM THE SET OF SPECIAL TOOLS ATA-4480 AND SCREW IT HAND-TIGHT USING THE NUT.

  (D)

  - SCREW IN THE SLEEVE NO.3 FROM THE SET OF SPECIAL TOOLS ATA-4480 INTO THE TOOL (1) UNTIL IT IS FLUSH IN CONTACT WITH THE CRANKCASE.